This kit provides everything you’ll need to mount and plumb in your TD04 turbo and will save you hours trawling through various websites trying to find all the correct parts from different suppliers. (Each having their own postage charges).
Our FULL MONTY kit contains the following….
3 x 316/A4 grade Stainless Steel studs. M10 x 1.5mm x 40mm long. (For manifold)
5 x 304/A2 grade Stainless Steel Aerotight locking stiff nuts. M10 x 1.5mm. (3 for manifold and 2 for downpipe)
2 x 316/A4 grade Stainless Steel bolts. M10 x 1.5mm x 40mm long. (For downpipe)
3 x 304/A2 grade Stainless Steel Aerotight locking stiff nuts. M10 x 1.25mm. (For downpipe)
8 x tab washers. M10. (For manifold and downpipe)
2 x turbo gaskets.
1 x block fitting adaptor for the oil feed line.
1 x oil feed line and banjo fitting/bolt.
2 x water feed banjos and bolts.
1 x sump fitting for the oil return. – 5/8″ hose barbs and 1/2″ BSPT thread.
1/2″ BSPT Tap for tapping the sump.
18.5 mm tapping drill.
1 x wastegate actuator mounting bracket. Clock the turbo to this bracket.
1 x cylinder head oil feed adaptor. Some later engines that don’t have an oil feed available from the side of the block. If so, use the port in the rear, left face of the cylinder head.
1 x 16 mm oil return hose. 1/2 metre length.
2 x hose clamps for oil return hose
1 x 8 mm turbo coolant hose. 1 metre length.
4 x hose clamps for water hoses
This kit saves over £13 compared to buying the parts separately.
Please contact us if ordering from outside of the UK so we can get you an accurate quote for shipping.