Kraken Low Mount Manifold And 3″ Downpipe. 1.6L

£799.95

Description

This beautiful low mount manifold is suitable for Garrett turbochargers with a T25 or T28 flange up to the GT2871 R model. The turbo sits below the manifold allowing for an almost straight exit for the downpipe which in turn creates faster spool up times and exhaust gas flow.

The downpipe is a whopping 3″ diameter and is fully tig welded and constructed form 304 grade stainless steel. The turbo flange is a standard Garrett 5 bolt pattern and the outlet is ‘open’ which means that it will require fabrication work to connect it to your exhaust. This is always the case if you are connecting it to a 3″ exhaust system. We can provide this service for an extra cost at our workshop in Chichester, West Sussex.

The Water Pump inlet hard pipe will need to be modified. If you are in Europe you can send us the part by mail and we can adapt it. If you are in N America Hawley Performance sells billet water pump inlet or of course you could modify it yourself

The gearbox casting tab has to removed, this can be done with an angle grinder in situ

Fits with Power Steering but Air Con is especially tight so we advise removing it.

Your order will include the following

1 x 1.6 Kraken Low Mount  NiResist T25 Manifold (fits all years 89-2005)

1 x 3″ SS Downpipe with ‘open’ end.

4 x 8mm Inconel Studs/Copper Nut

If ordering from outside the Uk, please get in touch so we can get you an accurate shipping quote.

You may also like…